MPS Pro Pushbuttons & Toggle Switches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please Note: Between 10/2006 and 03/13/2012 all MPS pro pushbuttons were made using metric style switches, buttons and guards. We are now building all our pro pushbuttons with our original switches. If ordering replacement parts please be aware of which style switch you have.

 

The Holeshot Button Assembly is made of billet aluminum and black anodized for tough good looks. The super quick button bolts directly to our Pro Button with air ports P/N 1-0186 with the provided 4-40 machine screws. The Holeshot Button Bracket is also available separately as P/N 1-0531 for those of you with your own special switches. The bracket has a 15/32” hole that will accommodate different switches. Please Note: A 90° fitting (P/N 1-0536) is required to redirect the filler valve when using the holeshot bracket.

The 1-0557 MPS Momentary SPST switch has a stiff spring and is used by lots of racers looking for the quickest button. It fits awesome in our Holeshot bracket! .500" mounting hole. The 1-0665 is the momentary switch we include with our on board air compressor.

 

MPS Modular Switch Assembly

      

These new modular switch assemblies let you build your own switch pod. The modular bracket is the center of the system and can be used as the front clamp on a sportbike master cylinder as well as with the provided back to clamp directly to the handlebars. There are three different accessory brackets that can be used on the modular bracket. One has a tether kill switch with coil cord and plug. There are two different switch brackets available. One has shorter offset and has a 1/4" diameter switch hole. The second has a little more offset for larger switches and has a 1/2" diameter switch hole. Both switch brackets can be used with a toggle switch or a push button switch.

MPS Street Lite Series Switch Assemblies

This lightweight, low cost line of switches solves the space problem when adding accessories on sport bikes. The Street Lite Switch housings are constructed of durable ABS plastic for dramatic weight savings over typical aluminum products. The most common uses are for air shifters and nitrous oxide applications, but can be used for any electric device that needs a switch.    All assemblies are also available in green, blue, red, white, yellow and orange, pink and purple when special ordered. The cost is the same but delivery may be delayed by one day.

• The Street Lite Single Switch (P/N 1-0700) features a single pole double throw momentary switch
• The Street Lite Dual Switch (P/N 1-0701) features the same momentary switch as the Street Lite Single Switch plus a double pole single throw rocker switch
• This MPS Street Lite Series Switch Assemblies fits all brand of motorcycles with clutch assemblies with bolt center spacing of 32mm for 7/8 handle bars made by Nissin (look on the back of your assembly you should see the name NISSIN somewhere)

 

MPS Toggle Switches

 

PMR Switches

The PMR Barswitch was designed to make it simple to add switches to your motorcycle. No more trying to find a place to mount switches. It replaces the cap that holds the clutch or brake assembly on the handle bar. The switches are On-Off switches and can handle up to 10 amps. This PMR Barswitch fits all brand of motorcycles with clutch assemblies with bolt center spacing of 32mm for 7/8 handle bars made by Nissin (look on the back of your assembly you should see the name NISSIN somewhere)

• Fits Motorcycles and Quads from Suzuki, Honda, Kawasaki, Yamaha
• CNC machined from 6061-T6 Aircraft Grade Aluminum
• Stainless Steel screws included
• Designed to replace factory clutch mounting bracket. (see picture above)
• May fit other makes & models

The PMR Thumb Switch is designed so while sitting on the bike the switch is right where your thumb is so you do not need to take your hand off of the grip. They fit all bikes with 7/8'' dia bars. They are thin and require only 5mm of space between the grip and your factory switch controls. This is easy to install just grab the end of the grip and slide it a couple of millimeters away from your factory switch housing. We designed our thumb switch to be easy to install, it is a split design so no need to remove grips or anything to put it on. These are designed to work on the clutch side.

• Military grade momentary switches
• CNC machined from aircraft aluminum
• Black anodized to match your controls
• Split design for easy install
• No need to loosen your grip to activate your button
• Available in Single or Double button design
• Easy to feel buttons even with your gloves on.

Part Number	Description	Racer Price
1-0059	MPS Pro Pushbutton	$73.92
1-0036	MPS Dual Pro Pushbutton	$114.35
1-0186	MPS Pro Pushbutton w/ Air Ports	$97.02
1-0383	MPS Pro Pushbutton w/ Air Loaded w/ Air Gauge, Filler, and Line Fitting	$115.50
1-0951	MPS Modular Handlebar Bracket	$82.95
1-0951-25	MPS Modular Switch Plate 1/4''	$15.74
1-0951-50	MPS Modular Switch Plate 1/2''	$15.74
1-0951-T	MPS Modular Switch Bracket Tether Kill	$40.95
1-0700	MPS Street Lite Single Switch Momentary	$40.95
1-0700-R	MPS Street Lite Single Switch Momentary Right Facing (made for ZX14)	$40.95
1-0701	MPS Street Lite Double Switch Momentary & DPST	$51.45
1-0216	MPS Pro Toggle Switch	$56.59
1-0249	MPS Pro Dual Toggle	$102.80
1-0530	MPS Pro Dual Combo (Button & Toggle)	$109.20
1-0044	MPS Plastic On/Off Toggle Switch	$28.88
1-0535	MPS Holeshot Button Assembly Black	$52.00
1-0535-BL	MPS Holeshot Button Assembly Blue	$52.00
1-1022	MPS Holeshot Momentary Button Black	$24.95
1-1022-BL	MPS Holeshot Momentary Button Blue	$24.95
1-0531	MPS Holeshot Button Bracket Only	$29.00
1-0269	MPS Switch Rocker On Off DPST 10A	$10.50
1-0293	MPS Switch Rocker Momentary DPST 13A	$10.50
1-0707	MPS Switch Rocker Center Off DPDT 13A	$10.50
1-0536	MPS Brass 90° 1/8'' NPT Male x 1/8'' NPT Female	$4.62
1-0557	MPS Momentary Switch SPST NO (Silver)	$20.79
1-0665	MPS Momentary Switch SPST NO (Black)	$13.86
1-0194	MPS 2nd Switch Kit	$17.32
1-0194-1	MPS 2nd Switch Kit - Roller Style	$17.32
1-0058	MPS Pro Pushbutton Switch - Original (uses 1-0126 guard)	$19.95
1-0394	MPS Pro Pushbutton Replacement Switch - Metric Style (uses 1-0395 guard)	$17.32
1-0276	MPS Pro Pushbutton Quick Switch SPDT (uses 1-0126 guard)	$26.85
1-0277	MPS Pro Pushbutton Quick Switch DPDT (uses 1-0126 guard)	$30.98
1-0148	MPS Pro Pushbutton Push On Push Off Switch (uses 1-0126 guard)	$33.49
1-0175	MPS Pro Toggle Replacement Switch (uses 1-0126 guard)	$13.86
1-0126	MPS Pro Pushbutton Guard	$5.78
1-0395	MPS Pro Bushbutton Guard - Metric Style	$5.78
1-0112	MPS Pro Pushbutton Button	$5.78
1-0396	MPS Pro Pushbutton Button - Metric Style	$5.78
1-0008	MPS Air Gauge	$12.71
1-0192	MPS Air Filler Fitting - Nickel Plated Brass and TPMS Compatible Metal Cap	$6.93
1-0193	MPS Straight Push in Fitting 10-32 Male x 1/4'' Poly	$8.51
87-pm-53	PMR Stealth Single Bar Switch	$84.95
87-PM-50	PMR Stealth Double Bar Switch	$94.95
87-PM-54	PMR Stealth Triple Bar Switch	$109.95
87-PM-78B	PMR Black Bar Clamp if Not Usings Factory Brake or Clutch Mounting Bracket	$49.95
87-PM-390S	PMR Single Thumb Switch	$119.94
87-PM-390D	PMR Double Thumb Switch	$129.94
87-PM-390-BUTTON	PMR Thumb Switch Button	$19.95

Please Note: Between 10/2006 and 03/13/2012 all MPS pro pushbuttons were made using metric style switches, buttons and guards. We are now building all our pro pushbuttons with our original switches. If ordering replacement parts please be aware of which style switch you have.

         

All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.

As hard as we try, the prices on website are not guaranteed. Please check with MPS for the most accurate pricing.

Motorcycle Performance Specialties, Inc.
380 Orange Lane - Casselberry, Florida 32707
Map & Directions
Phone: (321) 972-8282 - Fax: (321) 972-5123
Hours: 8am - 6pm, Monday - Thursday
Sales E-Mail: sales@mpsracing.com 

©1995-2024 Motorcycle Performance Specialties.  All rights reserved. | Privacy Policy