Sensors
Pressure Sensors
The MPS high quality stainless steel pressure sensors are accurate to 1%. They are compatible with most data acquisition systems. All sensors have a linear voltage output of .5 - 4.5 volts in the range of the sensor.
Speed Sensors
The MPS Hall Effect Crank Trigger Sensors are designed to trigger from a ferrous metal (magnetic steel) target, such as Holley's 60-2 crank trigger wheels. It can also be used for a cam sensor trigger and other applications.
8 Tooth Rear Wheel Speed Trigger Wheel
The 8 Tooth Rear Wheel Speed Trigger Wheel fit both Hayabusa & GSXR1000 that are using stock rear wheel speed sensors with aftermarket stand alone ECUs. Double the resolution of the stock Suzuki rear wheel speed sensor, the 8 tooth trigger wheel provides a quicker response to changes in rear wheel speed. This is very important for anyone using traction control. They work with the Robinson Output Shaft Supports as well.
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0863 |
MPS Trigger Wheel RWS 8 Tooth Suzuki (Shoulder O.D. 0.550'') |
$30.45 |
ABS Signal Coverter
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0924 |
MPS ABS Signal Converter |
$72.45 |
Map Sensors
Whether your engine has forced induction or is naturally aspirated, these Holley MAP sensors will keep your engine performing at its best.
Cam Sensors
Knock Sensor
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0739 |
MPS Knock Sensor 2 Wire |
$26.25 |
MPS Throttle Position Sensor
The MPS Throttle Position Sensor was designed to work with a 4 to 1 throttle cable for 4 individual throttle bodies or carburetors. It uses your existing Lectron throttle cable. Just remove all cables from the original round 4-1 junction block and install in the new TPS junction. The 2 long cables go to the outside and the 2 short cables go to the inside. The cable from the throttle to the junction goes on the top in the single hole.
Electrical Connections
Red – Sensor 5VDC
Black – Sensor Ground
Brown – Sensor Signal
O2 Sensors
Coolant Temp Sensor
A coolant temperature sensor employs a thermistor to obtain accurate measurement of engine temperature. As the engine warms, thermistor resistance decreases, letting the ECU know that it can reduce fuel enrichment.
Air Temp Sensor
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0727 |
MPS Air Temp Sensor 3/8'' NPT |
$16.80 |
|
59-74773 |
Accel Air Temp Sensor |
$15.86 |
|
1-0720 |
MPS Connector Air Temp Sensor |
$10.49 |
MPS Distance Sensors
The Laser Distance Sensors measures distance by bouncing a laser beam off a target, then back to the receiver. They calculate the distance away from the sensor and send a 0-10 VDC signal out based on the distance. The range is between 0-500mm (19.7") for p/n 1-0932. The laser sensor has a faster response time and is more accurate than a infrared sensor. The P/N 1-0932 is smaller and more rugged unit. These sensors are most often used for wheelie control.
The Infrared Distance Sensor measures distance by bouncing a Infrared beam off a target, then back to the receiver. It calculates the distance away from the sensor and sends a 0-5 VDC signal out based on the distance. Their range is between 100mm (3.9”) and 800mm (31.5”). These sensors are typically used for suspension travel monitoring.
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0932 |
MPS Laser Distance Sensor 0-500mm with Harness |
$786.45 |
|
1-0862 |
MPS Laser Distance Sensor Mount |
$40.95 |
|
1-0756 |
MPS Infrared Distance Sensor 100-800mm |
$82.95 |
MPS 4 Channel EGT Kit
The 4 Channel EGT Kit comes with a precision thermocouple amplifier and 4 type K thermocouples. The amplifier’s small size (3.35” x 2.15” x .650”) makes it perfect for motorcycle applications. The 4 Channel EGT Kit provides a highly accurate temperature measurement in range of 32-2282° Fahrenheit or 0-1250° Centigrade. It converts the thermocouple’s non-linear millivolt signal into a 0-5V linear analog output compatible with most engine management systems. It also has built-in cold junction compensation as well so any length wires can be used.
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0854 |
MPS 4 Channel EGT Kit |
$523.95 |
Accelerometers
MaxxECU Accelerometer 3G
Acceleration sensor with 0-5V output signal (max 3G):
- Pin 1: Sensor GND
- Pin 2: 0-5V output
- Pin 3: +5V power supply
Calibration:
- 1V = -3G
- 2.5V = 0G
- 4V = 3G
Holley EFI 2 Axis G-Meter
Introducing the Holley EFI 2 Axis G-Meter. Designed to be stable in the harshest environment. Co-Designed with RACEPAK, this G-meter would be a perfect fit for your four digit horsepower drag radial machine, or an autocross corner carver! The G-meter features both X and Y axis outputs. The X axis registers from a negative 3 G (deceleration) to a positive 12 G (acceleration). The Y axis registers +/-7.5 G. In order to ensure the installation is simplified the ECU pins come pre crimped. Loose pins are also provided if the cable needs to be shortened for clean installations.
- The X axis registers +/-7.5 G for acceleration and deceleration data acquisition
- The Y axis registers from -3G to +12G for cornering data acquisition
- Directional mounting arrow is provided, arrow needs to point forward, towards the front of the vehicle
- Instructions
Part Number |
Description | Racer Price | |
---|---|---|---|
44-554-162 |
Holley EFI 2 Axis G-Meter |
$358.95 |
RPM Infrared Temp Sensor
- Temperature Range: 0 - 500 F
- Makes Fast and Accurate Measurements
- Track Temp - Tire Temp
- Instructions
Part Number |
Description | Racer Price | |
---|---|---|---|
60-DTIR-500 |
RPM Infrared Temperature Sensor |
$249.00 |
MPS Relative Humidity Sensor
These small (.625” O.D. x 5.125” Long) relative humidity sensors are just the ticket to record humidity directly on your data logs. Never forget to do the weather for your run again. It senses humidity from 0-100% and comes with a 6’ shield cable for power and output connections. The relative humidity sensors are compatible with all data acquisition systems using a 0-5V analog input like the Holley EFI, Fuel Tech, or WEGO 3. They weigh a scant 7 ounces.
SPECIFICATIONS:
- Accuracy RH:@73.4°F (23°C) ±3.5% RH from 15 to 85% RH; ±4 % RH below 15 and above 85% RH
- Note: For Optimum performance, Unit should be operated in >1 MPH of moving air.”
- Input Voltage Range: 8 to 24 Vdc (polarity protected)
- Output: 0 to 5 Vdc for 0 to 100% RH
- Wiring:
- Red Wire: + power
- Black Wire: - power/output
- White Wire: + output
- RH Temperature Compensation: -13 to 185°F (-25 to 85°C)
- Repeatability: ±1% RH
- Housing: 316 stainless steel
- Connections: 6" (2 m ) shielded cable, stripped leads, PVC sheath
- Dimensions: 5.125 L X .625" D (130 x 16mm D)
- Weight: 0.18 lbs (67 g)
- Instructions
Part Number |
Description | Racer Price | |
---|---|---|---|
1-0660 |
MPS Sensor Relative Humidity/Temperature (coming soon) |
$249.00 |