MPS Logo
Fuel Injectors & Fuel Rails

60lb/hr 650cc/min
MPS 60# Fuel Injectors

 

42lb/hr 430cc/min
MPS 42# Fuel Injectors

 

80lb/hr 840cc/min
MPS 80lb Hayabusa Injectors

 

94lb/hr 980cc/min
MPS 95lb Injector Kit

MPS Injectors are available in 4 sizes:

  • 42 lb/hr / 440 cc/min (up to 270 normally aspirated horsepower @ 80% duty cycle & 43 lbs of fuel pressure)
  • 60 lb/hr / 630 cc/min (up to 385 normally aspirated horsepower @ 80% duty cycle & 43 lbs of fuel pressure)
  • 80 lb/hr / 840 cc/min (up to 510 normally aspirated horsepower @ 80% duty cycle & 43 lbs of fuel pressure)
  • 94 lb/hr / 990 cc/min (up to 600 normally aspirated horsepower @ 80% duty cycle & 43 lbs of fuel pressure).

The stock Gen 1 Hayabusa has 24.5 lb/hr . They are ideal for dry nitrous and turbo applications where much more fuel is needed. We can flash your 2002 - 2007 Hayabusa ECU with a base map for the 60 lb/hr injectors. This makes tuning easier. Both sizes fit in the Gen I Hayabusa stock fuel rail perfectly. The RCC Billet Fuel Rail ( p/n 84-41.1) is required to use our 42, 60, or 80 lb/hr injector kit in the secondary position on Gen 2 Hayabusas. The kits comes with everything necessary to install including new injector connectors.

42# Injector Specifications:

  • Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
  • Static Flow Rate @ 43.5psi ( 300kPa ) w/Gas: 42 lb/hr = 430 cc/min
  • Offset: 0.065ms
  • Connector: Bosch Style
  • Series: DEKA 4 ( DEKA IV )
  • Orifice Type: Multi-orifice
  • Spray Pattern: 30 Degree Spray Cone
60# Injector Specifications:
  • Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
  • Static Flow Rate @ 43.5psi ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min
  • Gain: 0.11ms/mg
  • Offset: 0.055ms
  • Turn on time @ 14VDC: 1.14ms
  • Turn off time: 0.85ms @ 600KPa
  • Connector: Bosch Style
  • Orifice Type: Multi-orifice
  • Spray Pattern: 30 Degree Spray Cone
80# Injector Specifications:
  • Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
  • Static Flow Rate @ 43.5psi ( 300kPa ) w/Gas: 80 lb/hr = 875 cc/min
  • Offset: 0.065ms
  • Opening/Closing Time 1.3ms / 0.7ms
  • Connector: Bosch Style
  • Spray Pattern: 26 Degree Spray Cone

94# Injector Specifications:

  • Coil Resistance: 12.8-14.5 Ohms
  • Static Flow Rate @ 43.5psi ( 300kPa ) w/Gas: 94 lb/hr = 980 cc/min
  • Connector: Bosch Style
  • Spray Pattern: 30 Degree Single
  • Length: 37mm

 

Click here to view Injector Dynamics injector selection

Injector Connectors
Injector Connector Gen 1 Hayabusa FemaleInjector Connector Gen 1 Hayabusa MaleInjector Connector Gen 2 Hayabusa Female1-0646
Injector Connector Bosch EV1Injector Connector Bosch EV6/ EV14

 

Billet Fuel Rails

 

MPS Billet Fuel Rail Gen I Hayabusa

MPS Fuel Rail Hayabusa Gen I
Avail colors for Hold Downs

Please note: Not recommended for stock injectors. They require 2 stock seals between the cylinder head and injector

MPS Fuel Rail Installed

RCC Billet Fuel Rail Gen II Hayabusa
RCC RailRCC Rail Installed

The RCC Billet Fuel Rail ( p/n 84-41.1) is designed to use our injector kits 1-0737,1-0560 and 1-0590 in the secondary position on Gen 2 Hayabusas. This will allow all the fuel needed for turbo and dry nitrous applications up to 400 HP. They come with machined in –6 fuel inlet and outlet fittings.

**To be used with aftermarket fuel rail for oversized injectors

Part Number

Description Racer Price

1-0733

 MPS Injector Kit 42lb Hayabusa Gen 1

$460.85

1-0737

 MPS Injector Kit 42lb Gen 2 Hayabusa and 07-08 Gsxr1000 Secondary**

$403.10

1-0734

 MPS Injector Kit 42lb GSXR1000 03-06

$403.10

1-0972

 MPS Injector Kit 42lb ZX14 (spacers included)

$460.85

1-0735

 MPS Injector Kit 42lb ZX12 00-02

$403.10

1-0736

 MPS Injector Kit 42lb ZX12 2003 and up

$460.85

1-0449

 MPS Injector Kit 60lb Hayabusa Gen 1

$460.85

1-0560

 MPS Injector Kit 60lb Gen 2 Hayabusa and 07-08 Gsxr1000 Secondary**

$403.10

1-0471

 MPS Injector Kit 60lb GSXR1000 03-06

$403.10

1-0970

 MPS Injector Kit 60lb ZX14 (spacers included)

$460.85

1-0542

 MPS Injector Kit 60lb ZX12 00-02

$403.10

1-0474

 MPS Injector Kit 60lb ZX12 2003 and up

$460.85

1-0586

 MPS Injector Kit 80lb Hayabusa Gen 1

$460.85

1-0590

 MPS Injector Kit 80lb Gen 2 Hayabusa and 07-08 Gsxr1000 Secondary**

$403.10

1-0587

 MPS Injector Kit 80lb GSXR1000 03-06

$403.10

1-0971

 MPS Injector Kit 80lb ZX14 (spacers included)

$460.85

1-0588

 MPS Injector Kit 80lb ZX12 00-02

$403.10

1-0589

 MPS Injector Kit 80lb ZX12 2003 and up

$460.85

1-0662

 MPS Injector Kit 94lb High Impedence Gen 1 with Connector

$681.45

1-0602

 MPS Injector Kit 94lb High Impedence Gen 2 with Connector

$628.95

1-0981

 MPS Injector Kit 94lb High Impedence GSXR1000 17+ with Connector

$681.45

65-15710-21H00

 Suzuki Injector Hayabusa Gen 2, GSXR1000 07+

$244.00

1-0683

 MPS Fuel Rail Hayabusa Gen I (Please Specify Color of Hold Downs)

$156.45

84-41.1

 RCC Fuel Rail Hayabusa Gen 2 for 62lb or 80lb Secondary Injector

$255.00

84-G2FRSI

 RCC Fuel Rail Hayabusa Gen 2 Stock Injectors (Inserts Included)

$269.00

84-RCC-SFIA

 RCC Insert for Stock Injectors in RCC Fuel Rail (each)

$8.00

1-0895

 MPS Fuel Rail GSXR1000 05-06

$156.45

1-0643

 MPS Connector Injector Gen I Female

$10.50

1-0645

 MPS Connector Injector Gen I Male

$10.50

1-0644

 MPS Connector Injector Gen II Female

$8.40

1-0646

 MPS Connector Injector Gen II Male

$16.80

1-0446

 MPS Connector Injector Bosch EV1

$10.49

1-0827

 MPS Connector Injector Bosch EV6/EV14

$10.49

1-0647

 MPS Injector Adapter Lead Hayabusa Gen I to Bosch

$16.80

1-0648

 MPS Injector Adapter Lead Hayabusa Gen II to Bosch

$16.80

1-0447

 MPS Injector Adapter - Each

$35.17